Dental Composite Resin Heater Material Warmer Softener 40/45/50℃ 100-240V

Description

Product Description
Resin heater is designed for heating composite resin material to improve the flow of its adhesive properties.
At the same time it can also be used to heat adhesive when used manual equipment, filter cover.
1- Light filter;
2- Heating plate;
3- Heating main body;
4- Resin base;
5- Temperature indicator;
6- Temperature selection and the on / off button;
7- DC power.
Operation
1. DC Plug the power adapter into the external socket to connect the power;
2. Green light is shining after the power supply the default temperature of 40 ℃;
3. One key operation, three temperature precise adjustable:
4. When the green light is standing, the temperature is 40 ℃;
5. Once again the key shows the yellow light shining, and the representative continues to heat until the yellow light is often bright and the temperature is 45 ℃;
6. Once again the key shows the red light shining, and the representative continues to heat until the red light is often bright and the temperature is 50℃
Temperature
Light color
Heating
Reached the preset temperature
40℃
Green
Shiny Green LED
Green LED often bright
45℃
Yellow
Shiny Yellow LED
Yellow LED often bright
50℃
Red
Shiny Red LED
Red LED often bright
Notice:
Quick flash means heating up, when the temperature reaches 50℃, then press the key it can be cooled to 40℃;
The light slowly flashes when cooling down.
Cleaning and disinfection
All the parts can be disinfectant cloth to wipe clean. Don't take any part in any liquid immersion disinfection.
Not 135℃ sterilization.
Technical parameters
power adapter
Input : 100-240V AC 50/60Hz
Output : 12V 3A