Dental Orthodontic Adhesive No-Mix Bonding Resin Light Cure Blue/no-mix Mini Kit

Description

Description of Self-Cure Resin:
1. This product is one kind of orthodontic direct bonding system resin with aromatic bis dimethyl acrylate resin as its main material.
2. As a new-type orthodontic direct bonding system, it is convenient to use with little waste, easy to handle independently and has a favorable clinical bonding strength.
3. It consists of primer and paste with acid etchant, spatulas and small brusher as its accessories.
Preparation: Clean tooth enamel surface,eliminate tooth contamination,rinse then isolate tooth and blow-dry.
Etching:Etching the enamel of the tooth with acid etchant for 50 or 60 sec. Rinse and dry with clean air. If the enamel does not have a chalky appearance, pls. repeat the process;
Brushing: apply a thin layer of the primer over the etched enamel with the brusher;
Bonding: apply another thin layer of the paste to seal the edges, adjust the bracket within 20 sec, give pressure for 5 to 10 secand remove the excessive primer and paste after 40 to 60 sec; then do orthodontic procedures followed 5-min curing.
Packaging Detail:
3 x black syringes (3.5g)
1 x primer bottle (10ml)
20 x Brushes
+
Description of Light-Cure Resin:
Warning: Ortho-Bonding primer and adhesive contains acrylate monomers. Acrylate monomers are known to produce allergic skin reactions in certain sensitive individuals. May cause eye and skin irritation.
Precautions: A void eye and skin contact. Wear gloves when handing this material.
Precaution: Please follow manufacturer's directions on the handing, proper use and recommendations for eye protection, when using a curing light
This system is designed to be used at room temperature (20-25°C, 68-77°F)。Storage between 2-27°C/35-80°F Light Sensitive
Contents:
3 x Adhesive paste Syringes (10.5g)
1 x Primer Bottle (8ml)
40 x Brushes
1 x Instruction Booklet
+
Description of Blue Glue:
This orthodontic adhesive provides a longer working time and a rapid setting time. Can be placed directly into bands. Excess flash is easy to clean up prior to the light curing and the cement is easy to see due to the blue color.
It contains fluoride to reduce the chance of declacification.
Packing list:
1 x Etchant acid Gel 2.5ml syringe;
1 x Light Cure Adhesive Paste 5g syringe;
1 x Syringe tip
Box size: 17*11*2.5cm
STORAGE: Store at 25℃ or less in a cool and dry place and avoid direct sun exposure. Recap the syringe after use.
+
Description of Green Glue：
Reasons for choosing green glue:
1. Green Glue is the two-way color change adhesive for brackets that provides the strength flexibility and intelligent features you demand.
2. Quick-cure polymerization ensure more reliable bond strength 185% more working time than other light cure adhesives allow for better placement.
3. The formula of green glue can improve the impact resistance by 118%, effectively reducing the accidental fall of brackets.
4. Two color change: Heating (Green)----Clear ---Get Cool( Green ), Green---Clear---Green
It is green when the temperature is low, allowing you to clearly identify the excess or residual green glue during the bonding and removal of brackets, so that it can be quickly and accurately removed without damaging the enamel layer. However, after light curing, the color of the green glue will change from green to transparent at normal temperature in the mouth, maintaining a beautiful effect.
Packing List:
1 x Adhesive paste Syringe (4g)
1 x Primer Bottle (3ml)
1 x 37%Gel Etchant (2.5ml)
Other accessories
FDA Statement
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory  agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your  status as an authorized purchaser of this item before shipping of the item.
Seller name :
azdental2020
City,State:SHENZHEN,China
Telephone number:0755-32870423