-40%

Dentex Dental Composite Resin Light Cure kit Etching Bond Adhesive A1/2/3/3.5 B1

$ 4.17

Availability: 36 in stock
  • MPN: SZ1400900000
  • Country/Region of Manufacture: China
  • Condition: New
  • Product: One-Step Bonding Adhesive
  • Intended Use/Discipline: Dental Laboratory, Dentistry
  • Brand: Dentex
  • Resin Type: A1

    Description

    无标题文档
    Description
    A1, A2,A3, A3.5, B1, B2
    Specifications:
    * Universal composite for anterior/posterior dentine and enamel
    * High radiopacity
    * Fluoride release
    * High strength (compressive strength>480MPa)
    INDICATIONS FOR USE:
    * Direct anterior and posterior restorations
    * Compatible with glass ionomer resin material
    * Cup buildup
    * Core buildup
    * Indirect anterior and posterior restorations including inlays, onlays and veneers
    Color Available: A1, A2,A3, A3.5, B1 and B2
    37% Phosphoric etching gel
    Dentex etching gel is a polymer thickened gel for use on enamel and dentin.
    This gel will effectively treat enamel and dentin, producing the necessary microretentive surface for successful bonding. The polymer thickener creates thixotropic properties, enhancing handling characteristics. The etchant rinse away cleanly and quickly, leaving no residue
    Packages
    : Refill: 5 ml/syringe, Instruction X1
    Indications
    :Treat dentin and enamel, Treating agent on dental restorative material.
    1. Isolate tooth and then prepare the cavity in a conservative manner. clean the entire surface with a slurry of pumice and water.
    2. Apply etchant using a tip, a disposable syringe tip, or disposable brush tip. allow etchant to remain in palce for 15 seconds. etching time should be monitored with a stopwatch. begin timing at the end of application.
    Option: place etchant enamel first, then proceed to cover dentin, for a slightly longer enamel etching time.
    3. Rinse thoroughly (at least 5 seconds) to completely remover all traces of etchant.
    4. Remove exces moisture from the tooth and proceed with the applicaton of etching gel, waiting for 10 seconds, then rise thoroughly. then apply adhesive
    5ml Bonding Adhesive
    Description:
    1. 5th generation adhesive for all classes of direct restoration.
    2. Post and core bonding.
    3. Ceramic veneer/crown/inlay and other indirect restoration bondings.
    Advantages:
    1. High bonding strength and long lasting durability.
    2. Easy infiltrate to dentin tubules.Reduce the risk of post-operative sensitivity.
    3. Compatible with all light cure restoratives.
    4. Time saving and easy to use.
    Usage:
    1. Enamel bonding :30 seconds DX.Etch37 etch on enamel then apply 5th generation adhesive.
    2. Dentin bonding:15 seconds DX.Etch37 etch on dentin then apply 5th generation adhesive.
    Package:5ml/Bottle
    A1,A2,A3,A3.5,B1+Etching Adhesive+Gel Kit
    INDICATIONS FOR USE:
    Direct restoration for all class caries.
    Restoration of teeth defect and veneer.
    Package:
    REFILL:
    Light Cure Composite: 4g/Syringe*5
    Syringe Needles : 5pcs/ box*1
    Total Etching Adhesive: 5ml/Bottle*1
    Etching Gel: 2.5ml/Syringe*1
    Applicators Brushes: 20pcs/box*1
    Net weight: 188.4g
    COLOR:
    A1,A2,A3,A3.5,B1
    FEATURES & ADVANTAGES:
    Unique dispersion technology ensure the filler evenly distributed
    Radioopaque and fluoride releasing Optimal polishability and high shade stability.
    Excellent handling, not sticky to instrument;
    Suitable for most cases of restoration, extensive indication of usage.
    INSTRUCTIONS

    (1)Preparation: isolate and prepare tooth.
    (2)Cleaning: rinse the preparation with water.
    (3)Drying: gently air dry until there is no visible water.Do not allow enamel or dentin to dry for an excessive period of time.
    (4)Applying Dentex Self-Etching Light Cure Adhesive (DSA):
    dispense 1-2 drops of DSA into a mixing well, apply enough DSA to the entire preparation with a little brush until a shiny surface is achieved and then wait for 10 seconds (DSA should not be applied too much ). Use a gentle stream of air to evaporate the solvent for 5 seconds. (If using a non self-etching adhesive, an etching step should be used according to the manufacturer's instruction).
    (5)Cure: light cure for 20 seconds at 500±50mW/cm2. Keep the distance to exposure surface less than 4 mm.
    (6)Applying Dentex light cure composite (DLC): place selected DLC into
    cavity preparation following by light cure. According to following
    table, the curing time is recommended for different depth and color
    shades. In order to reduce shrinkage stress, for a large cavity, an
    increment filling is recommended. In general, 1-2 mm increments are placed into cavity preparation from different sides and the restoration is built incrementally. Each increment is light cured for 30 seconds.
    (7) Finishing: after light cure, adjust restoration.
    (8) Polishing: use polishing strip or disc to polish the surface
    WARNING:
    Do not use this product for patient who is allergy to methylmethacrylate. Do not use this product with any material contained eugenol.
    PRECAUTIONS:
    Methmethacrylate resins may cause skin sensitization in susceptible persons. In case of contact, wash skin with soap and water. In severe situation, get medical attention.
    ATTENTION:
    To an exposed pulp, a pulp capping material such as Calcium hydroxide may be used before using this product.
    STORAGE:
    Store at 25

    or less in a cool and dry place and avoid direct sun exposure.
    Recap the syringe after use.
    DISPOSAL:
    After the product is used up, dispose it as normal medical rubbish.
    SHELF LIFE:
    3 years
    K180463
    Trade/Device Name: Apoller Flow Light Cure Flowable Composite
    Regulation Number: 21 CFR 872.3690
    Regulation Name: Tooth Shade Resin Material
    Regulatory Class: Class II
    Product Code: EBF
    Dated: August 23, 2018
    Received: August 29, 2018
    FDA Statement
    The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
    Seller name:Dentalbox
    City,State:SHENZHEN,China
    Telephone number:0755-23193580
    Relevant Policy